Lapel Pins – Wikipedia

imitation enamel and Cloisonne

• Meterials: copper for cloisonne and imitation enamel use copper, bronze, iron and alloys.
• Imitation enamel is more colourful than clisonne.
• Cloisonne are colourful glas powders, imitation enamel are one of paints.
• The source of imitation enamel is more smooth than cliosonn’s
• Cloisonne has a little dome, but imitation enamel not.

imitation enamel and soft enamel

• Imitation enamel surface is smooth and flat, soft enamel pins has recessed and raised areas.
• In many cases, soft enamel will have a epoxy finish. it’s shining.

soft enamel and photo etched

• Lines would be more delicate for photo etched.
• Soft enamel pins have the recessed area with coloring.
• 1.2mm for soft enamel pins and 0.8mm for photo etched

die struck and soft enamel

• soft enamel has colors, but diestruck no, only the metal color(i.e., gold, silver).

printed pins with others

• The most significant difference is that a variety of colors or other lapel pins are the lines between the metal lines to separate the printed pins does not require any metal lines, the same directly with the printing products can be directly printed.